Gas Leak Repair in Dallas, TX: 8 Leaks Repaired in One Property Until the System Held

Flash Fix plumber cutting into the wall at a black steel gas pipe elbow to repair a gas leak in Dallas TX

Gas Leak Repair · Dallas, TX

Written by Steven Shipler, Texas Licensed Master Plumber (Texas License #45825), MBA

QUICK ANSWER
This gas leak repair in Dallas, TX turned out to be 8 separate leaks in one property. We repaired each one as we found it, retested every time, and kept going until the whole gas system held pressure, at about 9 o’clock that night.
Gas Line Repair8 Leaks RepairedRetested After Every FixFinal Test Held

Gas Leak Repair in Dallas, TX: 8 Leaks, One Job

We got the call from a plumber working on a property close to downtown Dallas. His gas system wouldn’t pass a pressure test, and he couldn’t track down why.

The first leak was at the house heating system. We repaired it, but the system still wouldn’t hold. So we kept going, one repair at a time.

By the end of the night we had repaired 8 gas leaks. That’s the most we’ve ever had on one job. The last test held, and the gas system was tight.

Gas test still failing after a repair?

There may be more than one leak. We keep fixing until the gauge holds.

Call or Text 972-333-5448

What We Fixed, Step by Step

Step 1: Repair the leak at the heating system

The first problem showed up at the house heating system. We fixed it and put the system back on the gauge. It still dropped, which meant there were more.

Step 2: Check the pipe you can see

Bubbling leak solution on a threaded black iron gas fitting before repair in Dallas TX
Where the solution bubbles, the fitting needs to be fixed.

Every bit of exposed gas pipe got sprayed. Nothing else showed up, so the rest of the leaks had to be inside the walls and ceilings. We moved our gauge to the gas meter so the test covered everything from where the gas comes in.

Step 3: Open the walls at the elbows and repair

Flash Fix plumber cutting into the wall at a black steel gas pipe elbow to repair a gas leak in Dallas TX
We cut in at the elbows, where the pipe joints are.

We didn’t open walls at random. We cut in where the gas line has elbows, because that’s where the joints are. Two more leaks were behind the walls. We repaired both and tested again. Still dropping.

Gas pipe joint showing bubbles from leak solution inside an open wall in Dallas TX
One more joint that had to be repaired.

Step 4: Open the ceilings and finish the repairs

Plumber on a ladder repairing gas piping through an opening in the ceiling in Dallas TX
Working through the ceiling to reach the rest of the gas line.

Next came the ceilings, where the gas pipes run overhead. That’s where the rest of the leaks were. We repaired every one.

Step 5: The test that finally held

With all 8 repaired, we pressurized the whole system one more time. Around 9 PM, the gauge held steady. No more leaks.

Where the 8 leaks were
LocationLeaks repaired
House heating system1
Inside the walls, at elbows2
In the ceilings5
Total8

What a Homeowner Should Do First

  1. Smell gas? Get out first. Leave the building and call your gas company from outside.
  2. Don’t stop at one repair. If the system was leaking, retest it after the fix. There may be more than one leak.
  3. Ask where the test was done. Testing from the gas meter covers the whole system.
  4. Expect some drywall openings. Hidden gas joints have to be reached to be repaired.
  5. Use a licensed plumber. In Texas, gas piping work has to be done by a licensed plumber.

What Does Gas Leak Repair Cost in Dallas?

Pricing depends on the job. Call or text 972-333-5448 and we’ll tell you what yours needs.

Why Flash Fix

One call covers plumbing, sewer, electrical and air conditioning. Every plumbing job, gas lines included, is run by a Texas Licensed Master Plumber. On gas work, we don’t call it done until the system passes its test.

Related Flash Fix Articles

Serving Dallas and Nearby Cities

Dallas: this 8-leak gas repair was close to downtown Dallas. If your gas system won’t hold, we repair and retest until it does.

Richardson: we handle gas line repairs in Richardson homes too.

North Dallas: failed gas test in North Dallas? Call us and we’ll come find and fix the leaks.

Flash Fix also serves Allen, McKinney, Plano, Frisco and Dallas, across Collin County and Dallas County.

Frequently Asked Questions

Can one house have more than one gas leak?

Yes. This Dallas property had 8. Fixing the first leak didn’t stop the pressure drop, so we kept repairing and retesting.

How do you know all the gas leaks are fixed?

The pressure test. After the last repair, we put the whole system under pressure and it held. That’s how we know it’s tight.

Why did you have to cut the walls and ceilings?

The leaks were at pipe joints hidden behind drywall. We opened the walls at the elbows and then the ceilings to reach and repair them.

How long does a gas leak repair take?

It depends on how many leaks there are. This job had 8 and ran until about 9 PM.

Why test from the gas meter?

Testing at the meter covers the system from the point where gas enters the house, so nothing gets left out.

Why didn’t leak spray find all of them?

Leak spray only works on pipe you can see. These leaks were inside the walls and ceilings, so we had to open them up at the joints to reach them.

What should I do if I smell gas?

Leave the building and call your gas company from outside. Then call a licensed plumber to test and repair the system.

How much does gas leak repair cost in Dallas?

Pricing depends on the job. Call or text 972-333-5448 and we’ll tell you what yours needs.

Gas leak you can’t find in Dallas?

We’ll test it, fix every leak, and retest until it holds.

Call or Text 972-333-5448
Flash Fix Plumbing, Sewer, Electrical and Air Conditioning logo
About Steven Shipler
Steven Shipler is a Texas Licensed Master Plumber (License #45825) with an MBA. He runs Flash Fix, Incorporated in Allen, TX, serving Collin County and Dallas County with plumbing, sewer, electrical and air conditioning service.
Scroll to Top